This is a list of popular one-piece 34mm rifle scope mounts, sometimes called monolithic rifle scope mounts or unibody rifle scope mounts.
About scope mounts
There are two basic categories of monolithic mounts: standard or cantilever. On an AR15, cantilever offset mounts are required to move the scope forward to establish correct eye relief while maintaining the mount attachment entirely on the upper receiver’s rail. Standard rifle scope mounts without cantilever offset are appropriate for bolt action rifles and larger semi-automatic rifles such as the AR10 or SCAR 17.
Mount height refers to the distance from the top of the rail to the centerline of the optic. On most bolt action rifles, use the lowest height that still allows clearance for the objective bell (and lens cap), typically 0.9 inches to 1.3 inches. Mounting heights are typically higher on semi-automatic rifles due to the ergonomics of the cheek weld implicit in their design. Iron sight height over rail for common semi-automatic rifles:
- AR15/M16/M4 iron sights = 1.41 inches
- HK416/MR223/MR308 IAR diopter sights = 1.27 inches
- FN SCAR 16/17 = 1.45 inches
Many semi-automatic rifle users prefer optics mounted slightly higher than iron sight height, with about 1.5 inches being the most popular. A sight height of 1.9 inches is preferred For users with PEQ/DBAL devices mounted on the top of the front rail of an AR15.
Other features to consider when evaluating rifle scope mounts include:
- Rail clamping: QD (quick detach) use levers to remove or re-attach a mount without tools. Static mounts use 1/2 inch nuts or Torx-head bolts requiring tools, and ideally a torque wrench, for attachment.
- Cant: flat or no-cant (0 MOA) mounts are the default, but long range shooters prefer mounts with built-in cant, most commonly 20-MOA.
- Material: 6061-T6 aluminum is most common, but the more expensive 7075-T6 aluminum is harder and less likely to strip out bolt holes.
- Integrated bubble level: some of the high-end mounts include an integrated bubble level in the rear ring.
- Accessory attachment points: many of the mounts offer attachment points for accessories such as a reflex red dot sight.
About the optics database
The optics database contains most firearm optics for sale in North America, including complete offerings of 53 major brands. Features: comprehensive brand coverage, all specs in standard units, FOV at comparison powers, reticle diagrams, user manuals, country of assembly, and OEM factory.
Optic Type | Optics | Reticles |
---|---|---|
Micro reflex RDS | 75 | 93 |
Reflex red dot and holographic | 163 | 212 |
Magnifier | 34 | 0 |
Prism scope | 62 | 135 |
Fixed-Power | 52 | 92 |
FFP | 348 | 1113 |
SFP | 793 | 1827 |
Total | 1527 | 3472 |
New 2020 | 221 | |
New 2021 | 56 |
Popular posts:
- Low power variable optics (LPVOs)
- Mid-range first focal plane (FFP) rifle scopes (max between 10X and 20X)
- Long-range first focal plane (FFP) rifle scopes (max at least 20X)
- Short-range hunting scopes
- Long-range hunting scopes
- Always-on home defense AR15 optics
- One-mile rifle scopes
- Ballistic tools for estimating elevation and windage
- Laser rangefinders
- One-piece scope mounts
- View all buyers guides
About the author
I am a licensed outfitter/guide in Oregon, where we offer all-inclusive guncation experiences ranging from varmint hunting, to practical rifle courses, to extreme long range marksmanship.
I welcome feedback or questions! Email me at tom@sageratsafaris.com or connect with me on Reddit or Facebook. This page contains affiliate links where I earn on qualifying purchases at no cost to you. Thank you for your support!
If you found this post useful, help me out by sharing!
34mm one-piece rifle scope mounts
Filter: All | 1-inch | 30mm | 34mm | 35mm
Display |
---|
AADMOUNT AR Mount<$300 Features: Type: Cantilever Tubes: 1-inch, 30mm, 34mm, 35mm Clamping: Torx Cant: 20-MOA Height (in): 1.45 Weight (oz): 8.7 Material: 7075-T6 Features: 3 recoil lugs, Integral Tritium anti-cant bubble evel Shop: Manufacturer |
Features: Type: Cantilever Tubes: 34mm Clamping: QD Cant: 0, 20, or 30-MOA Height (in): 1.55 Weight (oz): 8.4 Material: 6061-T6 |
Features: Type: Cantilever Tubes: 34mm Clamping: Thumb-nut Height (in): 1.55 Weight (oz): 7.1 Material: 6061-T6 Shop: Amazon |
Features: Type: Cantilever Tubes: 34mm Clamping: QD Height (in): 2.01 Weight (oz): 8.5 Material: 6061-T6 |
Features: Type: Cantilever Tubes: 34mm Clamping: QD Height (in): 1.55 Weight (oz): 8.4 Material: 6061-T6 Features: Designed for Valdada QR-TS Pitbull 35mm, Nikon P223 3×32, and the Burris Timberline rifle scopes |
Features: Type: Cantilever Tubes: 34mm Clamping: QD Height (in): 1.55 Weight (oz): 8.4 Material: 6061-T6 |
American Defense Manufacturing AD-RECON-X-GI 34mm<$200 Features: Type: Cantilever Tubes: 34mm Clamping: Thumb-nut Height (in): 1.55 Weight (oz): 7.1 Material: 6061-T6 Features: Discontinued 2020 |
Features: Type: Standard Tubes: 34mm Clamping: QD Cant: 0, 20, or 30-MOA Height (in): 1.19 Weight (oz): 8.5 Material: 6061-T6 |
Features: Type: Standard Tubes: 34mm Clamping: QD Cant: 0, 20, or 30-MOA Height (in): 1.55 Weight (oz): 8.5 Material: 6061-T6 |
Features: Type: Standard Tubes: 34mm Clamping: QD Cant: 0 or 20-MOA Height (in): 1.55 Weight (oz): 8.4 Material: 6061-T6 |
American Defense Manufacturing AD-SCOUT<$200 Features: Type: Cantilever Tubes: 30mm, 34mm, 35mm Clamping: QD Height (in): 1.471 Weight (oz): 6.8 Material: 6061-T6 Features: Discontinued 2020 |
American Defense Manufacturing AD-SCOUT-S<$150 Features: Type: Standard Tubes: 30mm, 34mm, 35mm Clamping: QD Height (in): 1.471 Weight (oz): 6.5 Material: 6061-T6 Features: Discontinued 2020 |
American Defense Manufacturing AD-SCOUT-X<$200 Features: Type: Cantilever Tubes: 30mm, 34mm, 35mm Clamping: QD Height (in): 1.471 Weight (oz): 6.8 Material: 6061-T6 Features: Discontinued 2020 |
Features: Type: Standard Tubes: 30mm, 34mm, 35mm Clamping: Thumb-nut Cant: 0, 20 or 30-MOA Height (in): 1.4, 1.6 Weight (oz): 7.9 Material: 7075-T6 Shop: Brownells |
Features: Type: Cantilever Tubes: 30mm, 34mm, 35mm Clamping: 1/2″ nuts Cant: 0 or 20-MOA Height (in): 1.54 Weight (oz): 5 Material: 7075-T6 Features: Four accessory mounting points |
Features: Type: Cantilever Tubes: 30mm, 34mm Clamping: 1/2″ nuts Height (in): 1.7, 1.93 Weight (oz): 6.5 Material: 7075-T6 Features: Four accessory mounting points |
Features: Type: Cantilever Tubes: 34mm Clamping: 1/2″ nuts Cant: 20-MOA Height (in): 1.3 Weight (oz): 6.4 Material: 6061-T6 |
Features: Type: Cantilever Tubes: 34mm Clamping: 1/2″ nuts Height (in): 1.5 Weight (oz): 6.8 Material: 6061-T6 |
Features: Type: Cantilever Tubes: 34mm Clamping: 1/2″ nuts Cant: 20-MOA Height (in): 1.5 Weight (oz): 6.8 Material: 6061-T6 |
Bobro Single Lever<$250 Features: Type: Cantilever Tubes: 30mm, 34mm, 35mm Clamping: QD Cant: 0 or 20-MOA Height (in): 1.42 Weight (oz): 7.5 Material: 6061-T6 Features: Part B03-200 |
Features: Type: Cantilever Tubes: 34mm Clamping: QD Cant: 0 or 20-MOA Height (in): 1.42 Weight (oz): 7.5 Material: 6061-T6 Features: Part B03-202 |
Features: Type: Standard Tubes: 34mm Clamping: QD Height (in): 1.06 Material: 6061-T6 and 7075-T6 Features: Part B77-900 |
Features: Type: Cantilever Tubes: 1-inch, 30mm, 34mm, 35mm Clamping: QD Cant: 0, 20, 30, or 45-MOA Height (in): 1.378, 1.5 Weight (oz): 12 Material: 6061-T6 Features: Part B10-300 |
Features: Type: Cantilever Tubes: 30mm, 34mm, 35mm Clamping: QD Cant: 5 to 40 MOA via Burris Signature ring inserts Height (in): 1.5 Weight (oz): 10.1 |
Features: Type: Cantilever Tubes: 34mm Clamping: 1/2″ nuts Cant: 20-MOA Height (in): 1.35 Weight (oz): 8.7 |
ERA-TAC One Piece<$400 Features: Type: Standard Tubes: 30mm, 34mm, 36mm Clamping: QD or 1/2″ nuts Cant: 0 or 20-MOA Height (in): 1, 1.1, 1.2, 1.4, 1.5, 1.9 Features: Accessory mounting points |
Features: Type: Cantilever Tubes: 30mm, 34mm Clamping: 1/2″ nuts Cant: 0 or 20-MOA Height (in): 1.5, 1.9 Features: Accessory mounting points, 2 or 3-inch extension available |
ERA-TAC Ultralight<$250 Features: Type: Standard Tubes: 1-inch, 30mm, 34mm Clamping: Torx Cant: 0 or 20-MOA Height (in): 1, 1.1, 1.2, 1.4, 1.5 Weight (oz): 4.3 |
Features: Type: Cantilever Tubes: 1-inch, 30mm, 34mm Clamping: Torx Cant: 0 or 20-MOA Height (in): 1.5 Weight (oz): 5.3 |
Features: Type: Standard Tubes: 34mm Clamping: QD or 1/2″ nuts Cant: 20-MOA Height (in): 1.5 Features: Accessory mounting points, Optimized for illuminated Schmidt & Bender 5-20×50 PM II/LP Ultra Short |
Features: Type: Cantilever Tubes: 34mm Clamping: QD or 1/2″ nuts Cant: 20-MOA Height (in): 1.5 Features: Accessory mounting points, Optimized for illuminated Schmidt & Bender 5-20×50 PM II/LP Ultra Short |
Features: Type: Standard Tubes: 30mm, 34mm, 36mm Clamping: QD or 1/2″ nuts Cant: Variable Height (in): 0.8, 1, 1.2, 1.5, 1.7, 1.9 Weight (oz): 13.2 Features: Accessory mounting points, Adjustable incline from 0 to 70 MOA |
Features: Type: Cantilever Tubes: 30mm, 34mm Clamping: 1/2″ nuts Height (in): 1.54 Material: 7075-T6 |
Features: Type: Cantilever Tubes: 30mm, 34mm Clamping: 1/2″ nuts Height (in): 1.54 Material: 7075-T6 |
Features: Type: Cantilever Tubes: 30mm, 34mm Clamping: 1/2″ nuts Height (in): 1.54 Material: 7075-T6 |
Features: Type: Cantilever Tubes: 30mm, 34mm Clamping: 1/2″ nuts Cant: 20-MOA Height (in): 1.54 Material: 7075-T6 Shop: |
Features: Type: Cantilever Tubes: 30mm, 34mm Clamping: 1/2″ nuts Cant: 20-MOA Height (in): 1.54 Material: 7075-T6 Shop: |
Features: Type: Cantilever Tubes: 30mm, 34mm Clamping: 1/2″ nuts Cant: 20-MOA Height (in): 1.54 Material: 7075-T6 Shop: |
Features: Type: Cantilever Tubes: 30mm, 34mm Clamping: 1/2″ nuts Height (in): 1.54 Material: 7075-T6 Shop: |
Features: Type: Cantilever Tubes: 30mm, 34mm Clamping: 1/2″ nuts Height (in): 1.54 Material: 7075-T6 Shop: |
Features: Type: Cantilever Tubes: 30mm, 34mm Clamping: 1/2″ nuts Height (in): 1.54 Material: 7075-T6 Shop: |
Features: Type: Cantilever Tubes: 30mm, 34mm Clamping: 1/2″ nuts Cant: 20-MOA Height (in): 1.54 Material: 7075-T6 Shop: |
Features: Type: Cantilever Tubes: 30mm, 34mm Clamping: 1/2″ nuts Cant: 20-MOA Height (in): 1.54 Material: 7075-T6 Shop: |
Features: Type: Cantilever Tubes: 30mm, 34mm Clamping: 1/2″ nuts Cant: 20-MOA Height (in): 1.54 Material: 7075-T6 Shop: |
Features: Type: Standard Tubes: 34mm Clamping: 10-32 T15 (X4) Height (in): 1.18, 1.35, 1.425 Material: 6061-T6 Features: Multiple accessory mounting points, adapter plates available for most micro reflex red dots |
Features: Type: Cantilever Tubes: 34mm, 35mm Clamping: 10-32 T15 (X4) Cant: 15-MOA Height (in): 1.335, 1.425 Material: 6061-T6 Features: Multiple accessory mounting points, adapter plates available for most micro reflex red dots |
Hawkins One-Piece<$350 Features: Type: Standard Tubes: 34mm Clamping: 1/2″ nuts Cant: 0, 20, or 40-MOA Height (in): 1.27, 1.5 Features: Integrated bubble-level Shop: |
Features: Type: Cantilever Tubes: 34mm Clamping: 5X Torx Height (in): 1.47 Features: Pre-drilled for piggyback mounting JPoint reflex sight |
Features: Type: Cantilever Tubes: 34mm Clamping: 5X Torx Cant: 20-MOA Height (in): 1.47 Features: Pre-drilled for piggyback mounting JPoint reflex sight |
Features: Type: Cantilever Tubes: 34mm Clamping: 5X Torx Height (in): 1.47 Features: Pre-drilled for piggyback mounting JPoint reflex sight |
Features: Type: Cantilever Tubes: 34mm Clamping: QD Height (in): 1.55 Weight (oz): 9.4 Features: Adjustable ring spacing |
Features: Type: Cantilever Tubes: 1-inch, 30mm, 34mm, 35mm Clamping: QD Height (in): 1.5 Features: Tool-less Click Adjust Nut Shop: Amazon |
LaRue LT104 QD Mount<$300 Features: Type: Cantilever Tubes: 1-inch, 30mm, 34mm, 35mm Clamping: QD Height (in): 1.5 Weight (oz): 6.9 Shop: Amazon |
Features: Type: Cantilever Tubes: 1-inch, 30mm, 34mm, 35mm Clamping: VFZ Height (in): 1.5 Shop: Amazon |
LaRue LT158 QD Mount<$250 Features: Type: Cantilever Tubes: 1-inch, 30mm, 34mm, 35mm Clamping: QD Height (in): 1.44 |
Features: Type: Cantilever Tubes: 1-inch, 30mm, 34mm, 35mm Clamping: VFZ Height (in): 1.44 |
Features: Type: Cantilever Tubes: 1-inch, 30mm, 34mm, 35mm Clamping: QD Height (in): 1.5 |
Features: Type: Cantilever Tubes: 1-inch, 30mm, 34mm, 35mm Clamping: VFZ Height (in): 1.5 |
LaRue LT135 QD Mount<$250 Features: Type: Cantilever Tubes: 1-inch, 30mm, 34mm, 35mm Clamping: QD Height (in): 1.93 Features: For clearance over PEQ/DBAL laser illuminator Shop: Amazon |
Features: Type: Cantilever Tubes: 1-inch, 30mm, 34mm, 35mm Clamping: VFZ Height (in): 1.93 Features: For clearance over PEQ/DBAL laser illuminator Shop: Amazon |
LaRue LT745 QD Mount<$250 Features: Type: Cantilever Tubes: 1-inch, 30mm, 34mm, 35mm Clamping: QD Cant: 10 or 20-MOA Height (in): 1.5 |
Features: Type: Cantilever Tubes: 1-inch, 30mm, 34mm, 35mm Clamping: VFZ Cant: 10 or 20-MOA Height (in): 1.5 |
LaRue LT111 QD Mount<$300 Features: Type: Cantilever Tubes: 30mm, 34mm Clamping: QD Height (in): 1.535 Weight (oz): 6.6 Shop: Amazon |
Features: Type: Cantilever Tubes: 30mm, 34mm Clamping: VFZ Height (in): 1.535 Weight (oz): 6.6 Shop: Amazon |
LaRue LT112 QD Mount<$300 Features: Type: Cantilever Tubes: 30mm, 34mm Clamping: QD Cant: 20-MOA Height (in): 1.535 Weight (oz): 6.6 Shop: Amazon |
Features: Type: Cantilever Tubes: 30mm, 34mm Clamping: VFZ Cant: 20-MOA Height (in): 1.535 Weight (oz): 6.6 Shop: Amazon |
LaRue LT120 QD Mount<$300 Features: Type: Cantilever Tubes: 30mm, 34mm Clamping: QD Height (in): 1.285 Weight (oz): 6.6 Shop: Amazon |
Features: Type: Cantilever Tubes: 30mm, 34mm Clamping: VFZ Height (in): 1.285 Weight (oz): 6.6 |
LaRue LT807 QD Mount<$300 Features: Type: Cantilever Tubes: 30mm, 34mm Clamping: QD Height (in): 1.375 Weight (oz): 6.6 |
Features: Type: Cantilever Tubes: 30mm, 34mm Clamping: VFZ Height (in): 1.375 Weight (oz): 6.6 |
Features: Type: Cantilever Tubes: 34mm Clamping: 5X Torx Height (in): 1.5 Weight (oz): 6 Features: 3 recoil lugs |
Features: Type: Cantilever Tubes: 34mm Clamping: 1/2″ nuts Height (in): 1.5 Weight (oz): 5.9 |
Features: Type: Cantilever Tubes: 34mm Clamping: 1/2″ nuts Cant: 20-MOA Height (in): 1.5 Weight (oz): 5.9 |
Features: Type: Cantilever Tubes: 34mm Clamping: 1/2″ nuts Height (in): 1.5 Weight (oz): 5.9 Features: Left handed option available |
Features: Type: Cantilever Tubes: 34mm Clamping: 1/2″ nuts Cant: 20-MOA Height (in): 1.5 |
Features: Type: Standard Tubes: 1-inch, 30mm, 34mm, 35mm Clamping: Torx Cant: 0 or 20-MOA Height (in): 1.06, 1.125, 1.25 Weight (oz): 6.8 Material: 6061-T6 |
Features: Type: Standard Tubes: 34mm Clamping: 1/2″ nuts Cant: 20-MOA Height (in): 1.44, 1.5 Material: 7075-T6 |
Features: Type: Standard Tubes: 34mm Clamping: 1/2″ nuts Cant: 0 or 20-MOA Height (in): 1.44, 1.5 Material: 7075-T6 |
RRS Uni-Block mount<$350 Features: Type: Standard Tubes: 30mm, 34mm, 36mm Clamping: T15 Torx Cant: 0 or 20-MOA Height (in): 1.26, 1.5 Weight (oz): 7.6 Features: Integrated bubble-level Shop: |
ScalarWorks LEAP<$400 Features: Type: Cantilever Tubes: 30mm, 34mm Clamping: Thumb-nut Height (in): 1.57, 1.93 Weight (oz): 5.95 Material: 7075-T6 Features: Hinged ring design |
Features: Type: Cantilever Tubes: 34mm Clamping: Torx Cant: 20-MOA Height (in): 1.45 Material: 7075-T6 |
Spuhr QDP<$500 Features: Type: Standard Tubes: 30mm, 34mm Clamping: QD Cant: 0 or 20.6 MOA Height (in): 1.35, 1.5 Weight (oz): 9.5 Material: 7075-T651 Features: Multiple accessory mounting points, Integral bubble level |
Spuhr QDP Cantilever<$500 Features: Type: Cantilever Tubes: 30mm, 34mm Clamping: QD Cant: 0 or 20.6 MOA Height (in): 1.35, 1.5 Weight (oz): 9.5 Material: 7075-T651 Features: Multiple accessory mounting points, Integral bubble level |
Spuhr SCP<$250 Features: Type: Standard Tubes: 30mm, 34mm Clamping: Torx Height (in): 1, 1.18, 1.34 Weight (oz): 5.4 Material: 7075-T651 Features: Optional accessory mounting point |
Spuhr SP 34mm<$450 Features: Type: Standard Tubes: 34mm Clamping: Torx Cant: 0, 10.3, 20.6, 30, 44.4, or 61.8 MOA Height (in): 1.1, 1.18, 1.35, 1.5, 1.73, 1.89 Weight (oz): 8.4 Material: 7075-T651 Features: Multiple accessory mounting points, Integral bubble level |
Spuhr SP-B Long 34mm<$450 Features: Type: Standard Tubes: 34mm Clamping: Torx Cant: 0, 20.6, or 44.4 MOA Height (in): 1.5 Weight (oz): 9.5 Material: 7075-T651 Features: Multiple accessory mounting points, Integral bubble level |
Features: Type: Cantilever Tubes: 34mm Clamping: Torx Cant: 0 or 20.6 MOA Height (in): 1.35, 1.5 Weight (oz): 8.9 Material: 7075-T651 Features: Multiple accessory mounting points, Integral bubble level |
Features: Type: Cantilever Tubes: 34mm Clamping: Torx Height (in): 1.26, 1.5 Weight (oz): 8.7 Material: 7075-T651 Features: Multiple accessory mounting points, Integral bubble level |
Features: Type: Cantilever Tubes: 34mm Clamping: 1/2″ nuts Cant: 25-MOA Height (in): 1.574804 Weight (oz): 6.8 Features: Integrated bubble-level |
Features: Type: Cantilever Tubes: 30mm, 34mm, 35mm Clamping: Torx Cant: 0 or 20-MOA Height (in): 1.574 Weight (oz): 8 Material: 6061-T6 |
Features: Type: Cantilever Tubes: 1-inch, 30mm, 34mm Clamping: 1/2″ nuts Height (in): 1.435 Weight (oz): 7 Material: 6061-T6 Features: Previously named Viper Cantilever mount |
Features: Type: Cantilever Tubes: 34mm Clamping: Nuts Height (in): 1.435 Weight (oz): 6.7 Material: 6061-T6 Features: Steel threaded inserts |
Warne QDXSKEL34 34mm<$200 Features: Type: Cantilever Tubes: 34mm Clamping: QD Height (in): 1.435 Weight (oz): 8.5 Material: 6061-T6 Features: Steel threaded inserts |
Features: Type: Cantilever Tubes: 34mm Clamping: Nuts Cant: 20-MOA Height (in): 1.435 Weight (oz): 6.7 Material: 6061-T6 Features: Steel threaded inserts |
Warne RAMP34 34mm<$200 Features: Type: Cantilever Tubes: 34mm Clamping: Nuts Height (in): 1.435 Weight (oz): 9.7 Material: 6061-T6 Features: Steel threaded inserts, Removable 45 degree offset rails |
Features: Type: Standard Tubes: 34mm Clamping: T20 Torx Height (in): 1.181 Weight (oz): 7.1 Material: 7075-T6 Features: Accessory mounting points |
Features: Type: Standard Tubes: 34mm Clamping: T20 Torx Height (in): 1.386 Weight (oz): 7.1 Material: 7075-T6 Features: Accessory mounting points |
Features: Type: Standard Tubes: 34mm Clamping: Thumb-nut Height (in): 1.125 Weight (oz): 6.4 Material: 6061-T6 Features: Accessory mounting points, Six recoil lugs Shop: |
Features: Type: Standard Tubes: 34mm Clamping: Torx Height (in): 1.125 Weight (oz): 6.4 Material: 6061-T6 Features: Accessory mounting points, Six recoil lugs Shop: |
Features: Type: Cantilever Tubes: 30mm, 34mm, 35mm Clamping: Thumb-nut Cant: 0 or 20-MOA Height (in): 1.5 Weight (oz): 7.04 Material: 6061-T6 Features: Accessory mounting points, Six recoil lugs |
Features: Type: Cantilever Tubes: 30mm, 34mm, 35mm Clamping: Torx Cant: 0 or 20-MOA Height (in): 1.5 Weight (oz): 7.04 Material: 6061-T6 Features: Six recoil lugs Shop: OpticsPlanet |